The GS-320 Handheld Vector Network Analyzer VNA (Reflectometer) 23-6200 MHz is designed to measure the matching characteristics of passive and active radio devices (antennas, cables, filters, attenuators, amplifiers, etc.).
The device enables you to measure parameters of the complex reflection coefficient, standing wave ratio (VSWR), impedance, admittance, amplitude, phase, loss and distance of the cable fault point.
You can ask the dealer for the manual
Performance description:
Built with a durable aluminum housing, the GS-320 is a portable, automated instrument because of its light weight, compact structure, low energy consumption, and can be directly measured against the test object. The analyzer is especially suitable for companies working in the field of telecommunications, antenna installation and maintenance, cellular communication amplification, etc. With it, service centers and maintenance personnel can perform RF analysis of cables and antennas while performing commissioning or repair work. In addition, the equipment is ideal for workshops, radio enthusiasts, educational institutions and laboratories.
The device features a 3.2-inch color resistance screen that displays measurement results and controls the device.
For example, you can use the instrument to:
- Impedance matching using Smith circle diagram
- Measure standing wave ratio
- Measure attenuation in the cable
- Measure the distance of cable faults or irregularities
Benefits of the GS-320 23-6200 MHz Vector Network Analyzer:
- 3.2-inch color touch screen to quickly configure scanning parameters and display measurement results
- Wide operating frequency range: 23 MHz to 6200 MHz
- Scan speed up to 1000 points/second
- High precision measurement: 0.25 dB and 1.5° over the entire frequency range
- The ability to display up to four independent markers on all charts, making it possible to accurately evaluate the measured parameters
- Shows reflection coefficient with almost all possible instructions
- Ability to measure cable failure and loss distance
- Support PC, can be controlled through PC interface (PC software can be obtained through the dealer)
- Light weight, small size; Weight: 480g, product size: 145×72×24mm
- The built-in battery provides up to 4 hours of battery life
- Ability to power a device from a tablet or smartphone via a Typc-USB cable: A battery that is not discharged in time will not stop the workflow
GS-320 Specifications:
- Operating frequency range: 23-6200 MHz
- Frequency resolution: 10 kHz
- Maximum scan points: 1000
- Scanning speed: 1000 points/second
- The direction of the bridge, not corrected throughout the range: > 12 dB
- Effective directivity (after full single-port calibration) Note 1: > 50 dB
- Standing wave ratio at input: <2
- Phase measurement accuracy Note 1: > 1.50
- Amplitude measurement accuracy Note 1: > 0.25dB
- Resolution to determine the distance to the point of failure Note 2: (C x VF) / 2S m
- Measure the maximum length of the cable Note 3:30 00m (VF=1)
Maximum DC input voltage: 25 V
- Display diagram: Smith circle diagram; The phase of the reflection coefficient of the polar diagram; Amplitude; Logarithmic amplitude; VSWR, fault distance; Cable loss
- Operating temperature range: 0... + 40
- Screen diagonal: 3,2 inches
- Screen type: resistive
- Screen resolution: 320 x 240
- Battery capacity: 4000 mah
- Battery life Note 4: ~ 4 hours
- Battery charging time: ~ 6 hours
- Overall dimensions (length × width × height) : 145×72×24mm
- Package size (L × W × H) : 240×130×35mm
- Weight: 0.48kg
){kind=link}